epson printer

How to Resolve Epson WF 3620 Error Code 0x97?

An internal hardware problem can cause Epson error code 0x97. You can try to fix the problem by doing a lot of work. Although there are some solutions, a permanent solution is not available. Download Epson error code 0297 to fix it.

Epson printers are among the most popular on the market today. But best doesn’t mean perfect. You are likely to fall prey to error code 0.97. You may experience an error¬†if you use your¬†Epson Printer for long periods. An error code 0x97 may occur without warning or signs. This error is usually displayed on the printer as an indicator to turn the printer off and on. This error code appears during printing. Your printer will stop printing after this. This error code will continue to display, and your printer will stop printing as long as it continues to show.

Also Read:

Epson XP 7100 Printer Setup

Epson WorkForce WF-3640 Setup

How to fix Epson WF3640 error code 0x97

Do a power restart

If you experience an error when printing, then power off the printer. Restarting your device can help resolve any errors that a runtime problem may cause. These steps will allow you to power restart your Epson printer.

  1. Check that your printer is on
  2. Remove the USB cable from the printer
  3. Now, unplug your power cord.
  4. Give it a minute.
  5. Connect the power cord
  6. The Epson printer will automatically start
  7. Connect the USB cable

You can check if the Epson printer error code 0x97 has been fixed by running a print command on your computer.

Also Read:

0xf1 Epson Error Code

How to Fix an Epson Printer Error Code 0x97

Reset your printer

This is a virtual solution, and it works the same way as the previous one. Allow your Epson to cool down for a few minutes before disconnecting the printer cables. Hold the power button down for approximately 2 minutes. While holding the button down, connect the wires that you’ve previously disconnected. Press and hold the power button for another 2 minutes, then release it. Print the test page to ensure that Epson Printer Error code 0x97 has been resolved.

Clear Clogged the Printer Nozzles

  • Turn off your printer first. Then, disconnect it from the power source and your computer.
  • Now, carefully open the printer case.
  • Take a paper towel and clean it.
  • Place the paper towel in the middle of the printer head.
  • Let it sit for 12 hours, and check to see if the error code hasn’t returned.

Microsoft Printer Troubleshooter:

Microsoft provides many troubleshooting tools to help printers. You can choose anyone you like and use it to fix the printer. Run it on your computer, and you will be able to resolve multiple issues, including the Epson printer error code 0.97 error.

Also Read:

Connect Epson ET-2760 to the WiFi Network

How to Setup Epson WF 7710 Printer

Reinstall and Remove Your Ink Cartridges

The error code 0x97 is a warning that your ink cartridges are defective or damaged. Remove your cartridges and replace them quickly to check if your cartridges are wrong.

If all of your Epson printer cartridges appear in good condition, there may be a problem with the connection between your printer and the cartridges. Reinstall your cartridges to fix the problem.

Also Read:

How to Setup Epson Artisan 1430 Inkjet Printer

How To Refill Epson 288 Ink Cartridges

By admin

Leave a Reply

Your email address will not be published.

error: Content is protected !!